Product name: MDF/MDF
Specification: 1220 * 2440 * 2-25mm, 1220 * 3050/1220 * 4880 * 12-18mm
Glue: E2, E1, E0
Product characteristics: It is easy to process and can be processed into various patterns and shapes on its surface. It is a good material for making furniture at home and abroad. The surface of the density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the decorative property of the board surface is good.
Use of density board: mainly used for laminate flooring, doors, partitions, furniture, etc. The density board is mainly used for surface treatment of oil mixing process in home decoration; The density board can also be used for indoor and outdoor decoration, office and civil furniture, stereo, vehicle interior decoration, and also can be used as the production material of anti-static floor, dado, anti-theft door, wallboard, partition board, etc. in the computer room. At the same time, it is also a good packaging material.
Identification of density board:
1. The appearance depends on whether the thickness and density are uniform, whether the corners are damaged, whether there are layering, bulging, carbonization, etc., and whether there are soft parts.
2. When conditions permit, a small piece of density fiberboard can be sawn and soaked in water with a temperature of 20 ℃ for 24 hours to observe its thickness change, and observe whether there is any small bulge on the board surface. The large change in thickness and the small bulge on the board surface indicate that the waterproof property of the board surface is poor.
3. The density fiberboard with low emission shall be selected. Smell shall be used when selecting. The density fiberboard with small irritating smell shall be selected, because the greater the smell, the higher the formaldehyde emission, and the greater the pollution.
|
